[. . . ] SIL3811 Serial ATA to Parallel ATA Module SIL3811 is a Serial ATA to Parallel ATA device bridge chip. [. . . ] Connect the module's IDE connector to the Par allel ATA drive's IDE connector. Connect one end of the Serial ATA cable to a Serial ATA connector on the system board and the other end to the module's Serial ATA port. Using the provided power cable (refer to the lower left figure), connect the 2-pin connector to the module's power connector. Connect the 4-pin connector to the power supply unit. IDE connector The IDE connector is on the reverse side. [. . . ] Connect to the power supply unit Connect to the module's power connector 935-038110-000G A91200606 [. . . ]